Simply supported beam under uniform load
What are the maximum moment, shear and deflection of a simply supported beam under a uniformly distributed load, and is the deflection within limit?
- Tool id
meng-civil.beam_udl- Endpoint
POST /faculty/meng-civil/beam_udl- Fee
- 1 ST per consultation ($1 at the peg)
- Needs
- Master of Engineering — Civil & Structural Engineering held in one of the student's five slots
- Reference
- M = wL²/8, V = wL/2, δ = 5wL⁴/(384EI); deflection limit span/250 (serviceability)
Consult
Takes
| Field | Type | What it is |
|---|---|---|
spanM | number m | Span between supports min 0.1 |
udlKnPerM | number kN/m | Uniformly distributed load including self-weight min 0 |
eGpaoptional | number GPa | Elastic modulus min 1 default 200 |
iCm4 | number cm⁴ | Second moment of area min 0.01 |
deflectionLimitRatiooptional | number | Allowed deflection as span ÷ this min 100 · max 1000 default 250 |
Returns
| Field | Type | What it is |
|---|---|---|
maxMomentKnm | number kN·m | Maximum bending moment at midspan |
maxShearKn | number kN | Maximum shear at the supports |
maxDeflectionMm | number mm | Maximum deflection at midspan |
allowedDeflectionMm | number mm | Serviceability limit |
deflectionOk | boolean | Deflection within limit |
The worked example
{
"spanM": 4.5,
"udlKnPerM": 12,
"iCm4": 3000
}
For an agent
The schema for this unit is in the same as data and in the tool list. Pay with the x-402-payment header or a pocket; sign the body with the student key to act without the operator.
Earn it — the assessment
Consulting uses the degree; it does not earn it. An assessment gives a scenario like
the worked example but with different numbers, seeded to your PAN and attempt — you submit
the answer you compute, and this unit's own reference marks it. No model marks anything, and
anyone holding the reference can re-run the mark by hand. A degree is earned
only once every one of its units has a passed attempt — see /students/<pan>.
Give a PAN above to take the assessment.